Tag Archive | energy saving

Going Green.Cut Your Energy needs first

Before you go “Green”, it’s a good idea to cut your energy use first. Follow, these simple steps outlined below and make big savings in your energy consumption. In this article we will walk you through these easy to follow steps that will help you reduce your energy use before you start your “green ” energy conversion

With simple instructions available on how to convert to homemade wind power or DIY solar panels for as little as £200, many people are taking renewable energy more seriously. When choosing to take on a DIY conversion project the first question most people ask is will one windmill or one large solar panel be enough?
There are far too many factors involved to be able to fully answer that question for you here. But one way to start is to ensure your home is energy efficient in the first place. In this article we will walk you through some steps that will help you reduce your energy consumption before you start converting your home.
Reducing Your Energy Needs
One often overlooked step in converting a home to green power is reducing your energy needs in the first place. The average home uses inefficient lighting, power hungry appliances, and poor heating/cooling solutions. An important step to reducing your energy needs is to look at the inefficiencies in your current system.
Consider:
1. Replacing old incandescent bulbs with fluorescents or led bulbs.This can cut your energy use from lighting by 50%
2. Turn off lights when not in use.
3. Replacing old, inefficient, appliances may reduce your energy bills by as much as 30% in itself.
4. Always switch appliances off. Never leave them on standby.This wastes too much energy. You can now buy energy saving gadgets which will do this for you. However, if you start to make it part of your daily routine it will soon become second nature.
5. You should also look at your current heating/cooling solutions. That inefficient electric hot water heater could potentially be replaced by a modern solar water heater.
6.Or maybe your old air conditioner system,could be replaced with a more efficient heat exchanger.
7. Ensure the timer/ programmer on your heating only operates when the house is occupied.
8. Turn individual room, as well as radiator thermostats down one degree. You wont feel the difference, but this alone could save £50/£60 a year on your energy bills.
If you need help choosing more efficient appliances, or just want more energy saving advice, an excellent resource for this in the UK is http://www.housingenergyadvisor.com
Spend some time looking around the site and calculating how much you can reduce your energy consumption in different areas of your home. You don’t have to go and spend £1000’s replacing everything, but by simply reviewing everything in your home that consumes powerComputer Technology Articles, you will most certainly find many ways to cut your energy needs before you start your “Green Energy”conversion..

Further Steps in Saving Energy

Saving energy and thus saving money on energy is a hot topic in environment protection as well as household budget management. The many technical developments during the past decade made it possible to save a lot of energy with small changes in your life. One of such is LED lights, revolutionizing our concept of energy-saving lighting

Saving energy and devices advertised with such labels have now become a necessity in our lives. While previously, cars as well as homes were constructed with extremely high consumption of energy, today green solutions are preferred by individuals, companies and the government. Recognizing that the majority of traditionally used sources of energy are finite, non-renewable and also highly damaging to the environment, the price of energy rose radically, so trying to save on it is actually common sense.

With new technologies available, obviously the best way of saving energy is to use as much renewable energy as possible. This is a solution now available for most households and businesses, since small-size, portable solar panels and wind energy generators are both available on the market. They are also quite easy to add to any existing home system, and can take over supplying part or the entire of your home’s electric system.

However, if you are not prepared to make such sweeping changes right now, there is still a lot you can do to keep your energy costs low. A defected insulation of a house can do a lot of harm by wasting energy and allowing heat or cold air slip out of your house. Therefore, it is crucial to get your insulation checked and repaired as soon as you can, including the walls, doors, windows, and ideally the floor as well. If you can keep the heat outside during the summer and inside during the winter you will spend much less on both heating and air conditioning. An additional and useful solution for this could be an energy-saving roof, which has a reflective surface thus prevents solar radiation from entering the house via the roof. A further step is, of course, to use your roof as a solar panel.

Besides the above mentioned changes, there are a couple of things you can save energy with. First of all, try to monitor your consumption as much as you can. If you take a look at how and when you typically consume a lot of energy in your home, you have a better chance of saving on your energy consumption. There are some typical things we all tend to do arriving home, like turning the telly on instantly and leaving it on as a white noise all evening; or running the kitchen, the living room and the bathroom lights at the same time. We also often leave at least one bedside light on in the bedroom. As soon as we reach home often the entire flat is lit up and keeps running till we go to sleep. If you see yourself acting exactly the above mentioned way, these rooms would be the potential places where changing your lights for LEDs is the most urgent. With LED lights you will not have to worry about consuming a lot of energy, or switching them on and off often during an evening. You will also not need to worry about changing these LED lights any time soon due to their long lifespan. LED lights have very low energy consumption and instantly reach full brightness when switched on.

There are many ways of saving energy in your home, and with the many appliances and facilities; there will always be a further step you can take. But at first try to pay some more attention to your daily routinesFind Article, this way it is easy to get rid of unnecessary energy consumption.

Resolve to Save Energy This Year

Editor’s Note: It’s a new year, and that means new resolutions. Whether this is the first year you’re looking for ways to save energy or you want to lower your energy bills even more than last year, check out our eight strategies for saving energy. We first released these tips in 2013, and while a couple of the energy-saving numbers have changed, for a second year in a row, they remain the top eight ways you can save money at home.

At the beginning of every new year, millions of Americans make New Year’s resolutions, which inevitably are forgotten by the end of January. This year, forget making a New Year’s resolution. Instead make a home energy efficiency resolution.

Need some ideas on resolutions to make your home more energy efficient? To get you started, I consulted with our experts in the Building Technologies Office — who work on developing innovative, cost-effective solutions to saving energy — to create a list of the top ways to save energy and money at home. They came up with eight strategies all homeowners should adopt to lower their energy bills no matter the time of the year or their price range. Some tips are free or low cost and can be used daily to increase your energy savings, while others require a larger investment for long-term savings. This year, resolve to try one or more of these tips for improving your home’s energy efficiency, and start seeing savings on your next energy bill.

1. Install and set a programmable thermostat. You could save an estimated 10 percent per year on heating and cooling costs by using a programmable thermostat, and by resetting it when you are asleep or away from home, you won’t have to sacrifice comfort.

2. Use sunlight to your advantage. The sun’s rays can contribute heat in the winter but force air conditioners and fans to work harder — and use more energy — in the summer. During winter months, you can take advantage of sunlight by opening your curtains during the day to allow the sun to naturally heat your home. During warmer months, use light-colored window shades or blinds to reflect heat back outside, keeping your home cooler and more efficient. Using natural lighting effectively will also reduce the need to use artificial light.

3. When replacing appliances or purchasing electronics, look for ENERGY STAR appliances, fans and electronics. Your home’s appliances and electronics account for close to 20 percent of your energy bills. Using ENERGY STAR® certified products — which incorporate advanced technologies that use 10-15 percent less energy and water than standard models — throughout your home could save nearly $750 over the lifetime of the products. For example, ENERGY STAR clothes washers use about 40 percent less energy than conventional clothes washers while reducing water bills. ENERGY STAR washers also require less detergent and are gentler on clothes, saving you money on clothing expenses.

4. Choose energy-saving lighting. About 10 percent of the energy your home uses goes to lighting costs. By just replacing five of your home’s most frequently used lights with energy-efficient ENERGY STAR bulbs, you could save $75 a year in energy costs. Compared to traditional incandescent bulbs, compact fluorescent bulbs can yield as much as 75 percent energy savings and last six-times longer. You can get even more energy savings, longer life span and less wasted heat by switching to ENERGY STAR LEDs.

5. Use an electronic power strip for your electronic equipment. Many electronic devices and equipment continue to consume unnecessary energy even when not in use. Often called energy vampires, these devices cost families about $100 a year. Use a power strip for electronic devices and turn it off when not in use to eliminate energy vampires. And be sure to unplug your chargers — they draw energy even when they aren’t connected to a device.

6. Reduce energy for water heating. Water heating is a large energy expense in your home, accounting for about 14-18 percent of your utility bills. By taking low-cost steps, you can reduce your water heating bills. Make sure your water heater is set to no higher than 120 degrees. Install low-flow showerheads or temperature-sensitive shower valves. Newer water heaters have more insulation than older ones. If your water heater is more than five years old, you should wrap a water heater jacket around it to stop heat loss from the tank.

7. Hire a professional to maintain your heating and cooling system. Arrange for annual maintenance with a qualified technician. This includes checking the airflow over the coil, testing for the correct fluid (refrigerant) level, checking the combustion process and heat exchanger are operating safely, and ensuring proper air-flow to each room. In addition, you should clean the air filters in your heating and cooling system once a month, and replace them regularly.

8. Consult a home performance contractor to achieve large savings. There is a growing industry of professionals who are qualified to make recommendations to homeowners on how to improve the overall energy efficiency of their homes. These professional energy assessors will do a comprehensive energy audit of your whole house using special tools — such as a blower door test and an infrared camera to locate air leaks — to measure home energy efficiency.

A professional energy audit gives you a thorough picture of where your home is losing energy and what you can do to save money. By making upgrades (especially sealing air leaks and properly insulating your home), you can expect to save 15-30 percent or more in energy costs, while also improving your home’s comfort and air quality. Visit the Home Performance with ENERGY STAR website to learn more about this approach and to locate home performance contractors near you.